PVC Tent Fabric Manufacturer

As a PVC Tent Fabric Manufacturer in Anhui, China, Anhui Kingtex Material Technology Co., Ltd. produces high-performance coated fabrics for outdoor covering, temporary structures, and protective applications. We control the full process from polyester base fabric selection through PVC coating, lamination, and top-coating, so tent and tarpaulin fabricators receive rolls that cut, weld, and seam predictably.

Our range covers lightweight camping tent cloth through heavy-duty industrial tent materials, all built on a 100% polyester base with double-sided PVC coating. Depending on the specification, we add a blackout layer, acrylic or PVDF top-coat, and flame-retardant chemistry to meet B1, B2, or NFPA-701 requirements.

What We Supply

Application Fit

PVC tent fabric is selected by application, structure and expected service life. For event tents, outdoor catering and temporary shelters, the priorities are consistent color, ease of handling, blackout capability and flame-retardant compliance. For industrial storage, emergency facilities and heavy-duty sunshades, the priorities shift to tear strength, adhesion, UV resistance, waterproofing and dimensional stability.

• Circus tents, festival tents and outdoor event structures
• Temporary warehouses, storage halls and semi-permanent buildings
• Emergency shelters, relief tents and field medical facilities
• Sunshade structures, protective tarpaulins and equipment covers

Core Standard Specifications

Test methods used for the core data include DIN EN ISO 2286-1, DIN EN ISO 2286-2, DIN EN ISO 2060, DIN EN 1049-2, DIN 53354, DIN 53356 and ASTM D 751-2000.

Surface Treatment and Configuration

Acrylic top-coat improves weather resistance and cleanability. PVDF top-coat enhances anti-aging and self-cleaning behavior for longer-lasting exterior exposure. A full blackout layer can be added to achieve complete light blocking for tents used as sleeping quarters, changing rooms or temporary commercial spaces.

• Custom width and roll length to match cutting patterns
• Acrylic or PVDF top-coat for improved surface performance
• Blackout layer for privacy and shading
• Color matching against physical samples or reference codes
• Reinforcement versions where base cloth structure is critical

Production and Quality Control

We operate as a China PVC Tent Fabric Manufacturer and custom PVC tent fabric factory, with in-house PVC cold lamination, hot lamination, coating and a full set of testing instruments. A complete quality management system controls the process from raw material intake to final product shipment.

Consistent width, grammage, coating adhesion and flame-retardant performance are the parameters that matter most in tent production. We verify those values against the standards listed above and keep production records so repeat orders match the approved specification.

Fabrication, Installation and Maintenance

• Seams are normally hot-air welded, high-frequency welded or sewn with reinforced binding, depending on the tent structure and load path.
• For large-span roofs, specify the frame geometry and tensioning system so the fabric can be cut, hemmed and reinforced in the correct direction.
• During installation, avoid sharp contact with metal edges and keep the coated surface free of oil, fuel and abrasive debris.
• For long-term outdoor use, tension the membrane evenly and inspect seams, edge ropes and webbing eyes at least once per season.
• Clean with mild detergent and soft brush; do not use solvent-based cleaners that can attack the PVC coating.
• Store spare rolls in a dry, covered area away from direct UV exposure and heat sources.

Information We Use to Configure Your Solution

Frequently Asked Questions

What base fabric is used in your PVC tent fabric?

All standard models use a 100% polyester support cloth with 1000D x 1000D yarn. The base is coated on both sides with PVC, and the finished surface can be finished with acrylic or PVDF lacquer.

Which fabric weight should I choose?

For portable event tents and sunshades, 650 g/m² is a practical balance of strength and handling. For industrial storage, emergency facilities and long-term outdoor exposure, 750 g/m² or 850 g/m² provides higher tensile and tear strength.

What flame-retardant standards do you meet?

Our standard tent fabrics are available with B1 or B2 classification and meet the NFPA-701 B-S2 requirement. Confirm the specific standard required by your project so we can match the formulation.

Can you supply custom widths, colors and roll lengths?

Yes. We configure width, roll length, top-coat, blackout layer, color and reinforcement level around the tent design and downstream cutting process. Send your working drawing or sample specification with the inquiry.

How do you maintain batch-to-batch consistency?

Raw materials, coating weight, lamination parameters and finished dimensions are controlled through our quality management system and verified with the test instruments in our facility. Production records support repeat orders and OEM programs.